Adding TV support to an ICOM IC-7000
The ICOM IC7000 is a great little HF/VHF/UHF transceiver. It has many of the features of my IC7800, but in a smaller, easier to use form factor.
It also has an undocumented feature that the IC7800 doesn't -- it's a portable TV set!
Unfortunately, now that TV has moved to digital this doesn't really accomplish anything, but, well, I figured I might as well enable it anyway.
Here are some photos from the hack.
Front view of IC7000
Inside view with DSP (the silver, shielded box) removed.
Closeup of the board.
The solder jumper is just to the right of the image. It comes pre-bridged, I carefully scraped off the trace with an xacto knife.